Cables for Indoor and Indoor/Outdoor Installations

The cables for indoor or combined indoor/outdoor installation are all halogen-free and flame retardant (HFFR); consequently, no corrosive gases are generated during combustion. The indoor/outdoor cables are often used between a pre-terminated indoor optical distribution frame and an outdoor joint closure as well as for Fibre To The Antenna (FTTA) applications.

 

The range of indoor installation cables is intended for various tele­communication applications and especially for interconnection between the optical line interface and the optical distribution frames. The indoor cables are also suitable for use in LAN networks or other types of data networks. All indoor cables are halogen-free and flame retardant, and consequently generate no corrosive gases during combustion. All cables are also completely ­dielectric. The fibres in the cable can be of different types and different fibre types can be mixed in the same cable.

 

Micro Cable, Indoor

TOL4059011

Description

Micro cable based on a slim loose tube design with up to eight tubes per cable. The design faci­litates fibre preparation and mid-span access. The cable is designed for indoor installation and has good bend performance. 

 

 

Technical Information
Design: Loose Tube, micro cable, flame retardant 
Type: Indoor 
Capacity: 12-96 fibres 
Fibre type: G652D 
Dimensions: Ø8.3-8.6 mm 
Lengths: 2000-6000 m 

 

Micro Cable, Bend Resistant, Indoor

TOL4059013, TOL4059014

Description

Micro cable based on a slim loose tube design with up to eight tubes per cable. The design faci­litates fibre preparation and mid-span access. The cable contains bend-resistant G657A2 fibres that gives the cable excellent bend performance. 

 

 

Technical Information
Design: Loose Tube, micro cable, flame retardant, bend resistant 
Type: Indoor 
Capacity: 12-96 fibres 
Fibre type: G657A2 
Dimensions: Ø8.3-8.6 mm 
Lengths: 2000-6000 m 

Loose Tube, Indoor/Outdoor, GRHQBDUV

TOL4052003

Description
Loose tube cable with concentric core design, resulting in a cost-effective solution. Each tube contains up to 12 fibres and the cable contains up to 12 tubes. Dry water blocking makes the cable jointing procedure clean and easy. 

 

 

Technical Information
Design: Loose Tube, flame retardant 
Type: Indoor/Outdoor 
Capacity: 12-96 fibres 
Fibre type: G652D 
Dimensions: Ø12-16 mm 
Lengths: 2000-8000 m 

 

Patch Cable, Indoor, GNGQBDU

TOL4053033, TOL4053001

Description

Simplex and duplex, buffered patch cord cable, non-jelly filled with an outer diameter of 2.0 mm per element. It can be delivered pre-terminated with a variety of connector types. The cable has low shrinkage of less than 0.5% for reliable high performance. The 2-fibre version has a figure-8 design with single fibres laid in ­parallel, which makes it easy to split into two simplex patch cables.

 

 

Technical Information
Design: Tight buffered flame retardant, bend resistant 
Type: Indoor, IEC60332-3 cat C (LSZH), UL1666 
Capacity: 1-2 fibres 
Fibre type: G657A2, G652D
Dimensions: Ø2-2x4 mm 
Lengths: 1000 m 

 

Breakout Cable, Indoor, GNGQQBDU

TOL4053035, TOL4053018

Description

Break-out cable where simplex cables are assembled into one cable, with aramid yarn as strength member. The construction results in a robust cable combined with high flexibility. The cable can be delivered pre-terminated with a variety of connector types.